Product Details
Features
●Graded pore structure enhances dirt holding capacity
●All PP construction provides good resistance to both organic and inorganic solvent
●High contaminant removal efficiency
●PP core provides excellent strength of cartridge filter
●Long service life
Application
●Pre-RO
●Electronic
●Chemical solvents
●Drinking water treatment
●Cooling water
Specification
Materials of Construction |
Filter Media |
Polypropylene |
End Cap Material |
NA or Polypropylene |
Core |
NA or Polypropylene |
End Cap |
222 Flat/222 Fin/226 Flat/226 Fin/DOE |
O-Rings |
Silicone/EPDM/Viton/NBR |
Dimensions(Nominal) |
Nominal Outside Diameter : |
2.5inch/63±1(mm) |
Nominal Inside Diameter |
1.1inch/28mm |
Length |
10inch,20inch,30inch,40inch,
50inch,60inch,70inch |
Micron Ratings |
1μm,3μm,5μm,10μm,20μm,
30μm,50μm,75μm,100μm |
Operating Condition |
Maximum Temperature: |
180℉ (82 ℃) |
Maximum Pressure: |
50psi (3.5bar) @ 68 ℉ (20 ℃) |
Recommended change-out pressure: |
35psi (2.4bar) @ 68 ℉ (20 ℃) |
Different surface treatment is available:
DELTA PolyClassic melt blown is economical replacement for below vendors:
Brand |
Series |
Pall |
Nexis T Series |
3M Cuno |
Micro-Klean |
Parker |
Fulflo EcoBond Filter |
Eaton |
LOFTREX M |
Suez |
Hytrex depth filter |
Pentair |
Versaflex MB |
Amazon Filters |
SupaSpun |
Graver Technologies |
CRYSTAL MBF SERIES |
Order Information
For Example: DFMBA 5 - 40 B S |
DFMB |
Series |
Rating |
- |
Length |
End Cap |
O-Ring |
Core |
Delta Filtration Melt Blown |
A= Poly Classic A |
1=1μm
3=3μm 5=5μm
10=10μm
20=20μm
30=30μm
50=50μm
75=75μm
100=100μm |
NA |
10=10inch
20=20inch
30=30inch 40=40inch
50=50inch
60=60inch
70=70inch |
Blank=NA
A=222/Flat B=222/Fin
C=226/Flat
D=226/Fin
E=Self seal Spring
F=DOE |
S=Silicone
E=EPDM
V=Viton
N=NBR |
Blank=NA
P=Polypropylene |
http://www.delta-filtration.com/