TDS-100H Handhold ultrasonic flowmeter
TDS-100H is widely used to measure liquid flow in various industries thanks to its advantages such as smart body, high accuracy, good repeatability,long-running cell,easy operation, built-in printer etc. The flowmeter is very popular in industry like petrochemical, water, power, energy monitoring etc.
It's exported to Italy, Japan, Korea, Australia, America etc.
Features:
- Accuracy: +/-1%Fs
-Output of direct current signal: 4 - 20mA, impedance not more than 600 ohm
-Medium temperature: -20 ~ +150C
-Pulse output accumulative flow: Light isolation, collector, emitter open circuit passive output, pulse width 2ms
-Serial communication: RS485 or RS232 (opt)
-State of fluid: Full-pipe: Axis symmetry
-Power: 220V+/-10% AC 50Hz
-100V-240VAC for the charger
-Printer: (Opt. ) TpP-16 mini-printer
-Environment temperature: -10 ~ +45
- Environment humidity: Relative humidity not more than 85%
-Transducers Clamp on type transducers
-Transducer Cord Length Standard 2x10 meters, optional 2x 500 meters
-Data Logger Built-in data logger can store over 2000 lines of data
Technical parameters:
Sensor |
S1Z |
M1Z |
S1 |
M1 |
L1 |
S1H |
M1H |
Pipe size(DN) |
15-100 |
50-700 |
15-100 |
50-700 |
300-6000 |
15-100 |
50-700 |
Material |
Material |
ABS |
Special material for H -temp |
Frequency |
1MHz |
Installation |
V ( N/ W ) |
V/ Z |
V ( N/ W ) |
V/ Z |
Z |
V/ ( N W ) |
V/ Z |
Calibration |
Calibrated together with flowmeter |
Magnetic |
yes |
no |
Temperature |
0-70 |
0-160 |
IP |
IP65 |
Outline size |
200*25*25 |
200*40*40 |
45*30*30 |
60*45*45 |
80*70*55 |
90*85*24 |
90*82*29 |
N.W. g/2pcs |
250 |
1080 |
75 |
250 |
650 |
94 |
150 |
Medium |
Water sea water sewage Alcohol oil etc |
Turbidity≤ |
10000ppm with little air bubble |
Pipe |
Carbon steel stainless steel cast iron Brass PVC Aluminum etc. |
Pipe liner |
Rubber Slurry PP PS bakelite, PTFE |
Signal cable |
standard 5M *2 optional:10M* 2 or 15M* 2 |